Brother DCP-130C Software Driver Download and Setup. is 39x35x16cm in size and is light gray and black. There are a total of 15 buttons all on the right side of the front blade from the top with an awful LED display that you always look at the wrong angle to see what it says. The front has two card slots as well as one PictBridge. It’s nice to see the right paper tray – rather than the open print rack is presented face up on the shelf just above the paper tray. See Also: Brother DCP-110C Software Driver Download and Setup
Brother DCP-130C Software Driver Download and Setup
Print, Copy, Scan.
The flatbed scanner has a garden lid that requires 28 cm to go up to the vertical although there is no reason why tucking a sheet under the cover involves an increase of more than a few centimeters. Books or magazines, of course, require more significant improvement. The scanner is rather good, and I am quite happy with the quality of all the pages I downloaded to the PC. A Brother DCP-130c software driver download quick way to test the scanner is to use it as a stand-alone copier. Approximately 30 seconds for color copies very slightly different from the original. Somewhat faster for black prints but again quite acceptable.
To print a 200-word document that is everywhere in the draft mode it is 12PPM, and the more normal 1500 word documents scattered across the four pages is 10PPM, and the output for both grayed, so it is only useful for checking. Printing in normal mode produces a near black production but is a bit slow.
Now on to the photo output and regular readers will remember the terrible time taken to print A4 unlimited prints with the model last year. This year’s significant improvement only takes 9 minutes, still sick but on the same planet with other companies. To print four 9x13cm images on a piece of A4 paper, it makes the same time. Although I chose indefinitely and clicked on the ‘this time-consuming’ message I got was four 9x13cm images all with borders, and this took about 8 minutes. So it will only print A4 sheets with unlimited single photos, and it will just do this in the middle quality of the picture when you choose the best automatically unticks indefinitely.
Specs for Brother DCP-130C
The Printer Brother DCP-130c software driver download All in One offers 1200×6000 dpi resolution and Color Inkjet Printer. The Flatbed Digital Copier, Flatbed Color Scanner, PhotoCapture Center, No FAX, up to 25 ppm Mono, up to 20ppm Color with print speed 600x150dpi, 16MB (RAM). Memory Standard Up to 100 Sheets Paper Capacity, Compact Flash, Memory Stick, Memory Stick Pro, Secure Digital, PhotoCapture Center xD-Picture Card.
DCP-130c supports 20ppm respectable for color and 25 ppm for monochrome. The copy speed is the same as for MFC-440CN, but without ADF, it translates to “as fast as you can re-re-page above and beyond the glass” for scanning. The same software (ScanSoft PaperPort SE with OCR for Windows, and Presto! PageManager for MacOS) including bundled including this machine, also it includes the same memory card handling capabilities (Compact Flash, Memory Stick Pro, xD-Picture Card, and Secure Digital).
System Compatibility / Operating System
Windows 10 / Windows 10 (x64) / Windows 8.1 / Windows 8.1 (x64) / Windows 8 / Windows 8 (x64) / Windows 7 / Windows 7 (x64) / Windows Vista / Windows Vista (x64) / Windows XP / Windows XP (x64) / Macintosh / Mac OS X (10.5/10.6/10.7/10.8/10.9/10.10) / Linux OS.
Software Driver Download and Setup
Brother DCP-130C Full Driver & Software Ver. 18.104.22.168 (Windows)
Brother DCP-130C ControlCenter3 Update Tool (Windows)
Brother DCP-130C Printer Driver Ver. 4.5.0b (Mac)
Brother DCP-130C Scanner Driver Ver. 1.13 (Mac)
Brother DCP-130C Driver Ver. 2.1.1-1 For Linux (rpm)
Printer Manual Installation for Brother DCP-130C
- These Instruction are for Windows 7 Operating System, may be different from the other Versions or Operating System.
- If the driver is installed on your computer, remove it before installing the new driver and You must log in as Administrator
- If the Windows Security dialog box Appears, inspect Always count on software from” Brother Industries, Ltd.” as well as click Install
How to Install Brother DCP-130C Driver Printer for Windows
1. Make certain the computer system and also the Brother Machine not connected
2. When the download is total as well as you prepare to set up the files, click Open Folder, then click the downloaded data. The data name ends. Exe.
3. You can approve the default area to conserve the documents. Click Next, and then delay while the installer extracts the data to get ready for setup.
4. KEEP IN MIND: If you shut the Download Complete screen, search to the folder where you conserved the. Exe documents, and after that click it.
5. Select your language with reference to the language checklist as well as click “OK”.
6. Please adhere to the setup display directions.
The above instruction helped you to install Brother DCP-130C software and make the printer working fine. Thank you!
How to Install Brother DCP-130C Driver Printer for Mac
1. Turn on your Mac where you want to mount Brother DCP-130C printer motorist.
2. Just connect USB cable between computer system and printer.
3. Extract the application zip files to a data area.
4. Click on Start button as well as kind “Printer”. You will get an option like “Add a printer”. Click on that.
5. The following direction will ask to mention where the motorist located. Do that according to the progression.
6. Simply answer the wizard options till setting up the Brother DCP-130C.
7. Now your printer is ready to use as the software of Brother DCP-130C software installed successfully.
How to Uninstallation Driver Guide
1. Open Devices and Printers by clicking the Start button Picture of the start button, and then, on the Start menu, clicking Devices and Printers.
2. Right-click the printer that you want to remove, click Remove device, and then click Yes
4. If you can’t delete the printer, right-click it again, click Run as administrator, click Remove device, and then click Yes.